Shanghai Huitian New Material Co., Ltd
Shanghai Huitian New Material Co., Ltd Bond today and future ,with our technology!
Add to Cart
● Product Features:
Ø Single component, condensation type.
Ø Room temperature fast curing.
Ø Ethyl alcohol released after curing, non-corrosive to electronic components
ØHigh adhesion to aluminum, copper, stainless steel and other metal
Ø High & low temperature resistant
Ø Fully meet the requirements of the EU ROHS
| Item | Unit | Typical Value | |
| Color | Translucent | ||
| Component of Basic Materials | Polysiloxane | ||
| Density | g/cm3 | 1.06 | |
| Dry to touch | min | 3 | |
| Handing Curing Time | min | 40 | |
| Initial Curing Time | hour | 3 | |
| Full Curing Time | hour | 24 | |
| Tensile Strength | After Curing | 1.2 Mpa | |
| Elongation at break |
After Curing 25℃ |
% | 230 |
| Harness | Shore A | 31 | |
| Volume Resistivity | Ω*cm | 1x1015 | |
| Dielectric Strength | KV/mm | 22 | |
| Dielectric constant | 1.2MHz | 2.6 | |
| Work Temperature | ℃ | -60~200 | |
● Main Applications:
Ø Sealing protection element connection port
Ø Bonding and sealing all kinds of home appliance
Ø sealing and anti leakage, waterproof, shockproof for appliances components
● How to Use
Ø Clean the surface: remove the rust, dust and oil etc.
Ø Glue onto the surface has been cleaned.
Ø Curing: which component was coated with adhesive and put it in the air, after that it is the curing process (At room temperature and 55% relative humidity). Adhesive curing 2 ~ 4mm depth. With the extension of time, the curing depth increasing.
● Packing:
Ø 310ml/Tube 25tubes/Carton
● Storage:
Ø Keep it away from children.
Ø Use it in ventilated places
Ø In case of contact with skins, wipe and then flush with clear water.
Ø In case of contact with eyes, flush with clear water immediately and go to hospital for checking.
Ø Store it in dry and shady places at the temperature of 8~28℃
Ø Storage life: 12 month.